From site preparation to electrical connection, here’s what you need to do to prepare. If you have any questions, don’t hesitate to reach out to one of our friendly sales associates. You can also request a site visit by completing the form on this page.
We recommend allowing at least three feet of access on all four sides of your spa in the event that a technician needs to access your spa for service. If you are planning to sink your spa into the ground or enclose it with walls please speak with a member of our team first.
We recommend Brian Bradley Electrical Contractor for unmatched quality and service:
⭐ Extensive experience wiring thousands of spas
⭐ Complimentary startup and fill service
⭐ Knowledge of local permit requirements
Call 978-212-8014 or email bbradleyelectric@aol.com
Important: Electrician should be contacted before the start of any patio, concrete or deck work.
A solid level surface is required. The typical weight load is 80-100 lbs per square foot. This may be supported by a recessed gravel bed embedded with pressure treated wood, 4”x4” or larger beams, a reinforced concrete slab at least 4” thick, patio stones or pavers, wooden deck, or SmartDeck available.
Please review our full Hot Tub Site Preparation, Delivery, and Operation Information Sheet!
